Specification

  • Twin control brazing torch station
  • Jewellery torch
  • Central pilot light and Alumina chip forge
  • Manual Air / Gas mix on Torches
  • Automatic start with Pre-Ignition Gas Integrity Check for open torches and appliance gas leaks
  • Compliant to Gas Appliance Directive BS EN203-1
  • Removable table cover for use as a welding surface

Construction:

Concrete refractory slab work area. Fireproof liners. Robust powder coated steel steel construction.

What's Included:

  • 10kg Alumina Chips (5kg required)
  • 5 Heat reflective blocks
  • Chip rake
  • Brazing kit : Interlock

Colour & Weight:

Red / Grey - 180kg

Dimensions:

  • W900mm x D570mm x H1290mm

Power:

240v / 1 phase / 50Hz Natural Gas

Options:

Fume Extraction Hood: (see part No. HME0053)

Installation:

Gas supply pressure 20mbar; 1/2 inch BSP gas connection; Floor fix & hard wire

Warranty:

12 months Parts and Labour Warranty subject to annual service by an HME Engineer

General Maintenance:

Safety test and HME 12 monthly chip replacement service. Refer to user’s manual

Health & Safety Consideration:

Requires fume extraction; Requires welding curtain/screen if used for welding; COSHH Regulations; BB81 safe Working Area spacing