Specification

  • Twin control brazing torch station
  • Jewellery torch
  • Central pilot light and Alumina chip forge
  • Manual Air / Gas mix on Torches
  • Automatic start with Pre-Ignition Gas Integrity Check for open torches and appliance gas leaks
  • Compliant to Gas Appliance Directive BS EN203-1
  • Removable table cover for use as a welding surface

Construction:

Concrete refractory slab work area. Fireproof liners. Robust powder coated steel steel construction.

What's Included:

  • 10kg Alumina Chips (5kg required)
  • 5 Heat reflective blocks
  • Chip rake

Colour & Weight:

Grey/Red 180kg

Dimensions:

  • W900 x D570 x H1290mm

Power:

240v / 1 phase / 50Hz Natural Gas; 240v / 1 phase / 50Hz - liquid Propane Gas

Options:

Fume Extraction Hood: (see part No. HME0041)

Installation:

Gas supply pressure 20mbar; 1/2 inch BSP gas connection; Floor fix & hard wire

Warranty:

12 Months manufacturers Parts & Labour; Warranty in mainland UK only

General Maintenance:

Safety test and HME 12 monthly chip replacement service

Health & Safety Consideration:

Requires fume extraction; Requires welding curtain/screen if used for welding; COSHH Regulations; BB81 safe Working Area spacing