Specification

  • 150mm 3 Jaw chuck
  • 150mm 4 Jaw chuck
  • 4 Way Toolpost
  • Fixed and travelling steadies
  • Micro adjustable bed stop
  • Coolant system
  • Halogen Low voltage light
  • Dead Centres
  • Face plate
  • Centre height 165mm
  • Maximum swing 330mm
  • Swing over gap 476mm
  • Swing over cross slide 198mm
  • Distance between centres 500mm
  • Bed width 185mm
  • Longitudinal speeds (8)rpm 70-2000
  • Range of cross feeds 0.018-0.275mm/r
  • Range of longitudinal feeds 0.067 - 1.019mm/r
  • Range of metric threads 0.45 -10mm
  • Range of imperial threads 31/2-80tpi
  • Tailstock taper 3MT
  • Tailstock quill travel 92mm
  • Top slide travel 76mm
  • Cross slide travel 160mm
  • Headstock taper bearings roller
  • Compound slide swivel 360°
  • Chuck mounting camlock D1-4
  • Motor 1.5kW
  • Spindle bore 38mm
  • Number of spindle speeds 8
  • Range of spindle speeds 70-2000rpm
  • Top slide travel 68mm
  • Cross slide Travel 68mm
  • Tailstock quill Travel 92mm

Construction:

Heavy robust cast iron construction

What's Included:

  • Induction hardened & ground bedways
  • Precision Ground gears
  • D1-4 spindle supported by taper roller bearings
  • Overload clutch shaft
  • Removable gap bed
  • Low voltage curcuit
  • Spindle brake
  • Slide out tray
  • Telescopic Leadscrew covers
  • 150mm 3 Jaw chuck
  • 150mm 4 Jaw chuck
  • 4 Way tool post
  • Micro adjustable bed stop & coolant system
  • Halogen low voltage light
  • Dead Centres
  • Face plate
  • Fixed and travelling steadies
  • Precision collet chuck D1-4
  • A set of 11 metric collets 10mm - 20mm in 1mm increments
  • A set of 14 imperial collets 3/8'' to 25/32''

Colour & Weight:

Green 500kg

Dimensions:

  • W1320mm x D610mm x H1400mm

Power:

400v / 3 phase / 50Hz

Options:

Single phase with DRO

Installation:

Fix floor and hardwire

Warranty:

12 months manufacturer's warranty

General Maintenance:

12 Monthly safety test required - Refer to user manual

Health & Safety Consideration:

BS4361